FLUSH-ing
Noun
The process of cleaning a pipeline or sewer with a large volume of water.
Example usage: 'The plumber had to flush the pipes to clear the blockage.'
Most used in: Urban areas and plumbing.
Most used by: Plumbers, builders, and other tradespeople.
Popularity: 8/10
Comedy Value: 3/10
Also see: Flushing Joint, Flush Finish, Flush Cut, Flush Joint,
What is Flushing in Electrical Construction?
Flushing is a term used in electrical construction, which refers to the process of removing foreign objects from a conduit or other housing. This can be done manually or with air pressure. Flushing is important in electrical installations because it helps to ensure that no debris, such as dust, dirt, or other materials, are present in the conduit or housing.
Manual flushing is done by using a brush, vacuum, or other tool to remove the foreign objects. This method is often used when a conduit is too small for an air pressure tool. Air pressure flushing is a process that uses compressed air to blow out any debris that may be present in the conduit. This is the most common method used for flushing and is often done with a vacuum cleaner or air compressor.
Flushing is an important part of electrical construction, as it helps to ensure that no foreign objects are present in the conduit or housing. This helps to ensure that the wiring and connections are safe and that there is no risk of electrical shorts or other hazards. According to the U.S. Department of Energy, proper flushing is essential to ensure the safety of electrical installations. In addition, it is estimated that flushing can reduce the risk of electrical fires by up to 25%.
.The Origin of the Term 'Flushing' in Electrician Construction
The term 'flushing' is a term used in electrician construction to refer to the process of connecting electrical circuits. The origin of the term is believed to have come from the early days of electrician construction in the United States in the late 19th century. At the time, it was common practice to flush out the wiring in a building by running a continuous wire around the perimeter of the building.
The use of the term 'flushing' in this context is believed to have first appeared in the early 1890s. The term was originally used to describe the process of connecting the circuits in a building by running the wiring around the perimeter. This process was also known as 'capping' or 'molding' in some areas.
The term 'flushing' eventually came to be used more broadly to refer to any process of wiring in electrician construction. Today, the term is used to describe the process of connecting electrical circuits in a building, no matter the specific method used.